To Next PageTo Next Page
Need help?Do you have a question about the Onkyo Integra TX-DS898 and is the answer not in the manual?
Covers instructions on reading, usage, cleaning, placement, and water/moisture precautions.
Guidance on power sources, grounding, polarization, and cord protection.
Advice on lightning, power lines, and overloading risks.
Details on hazards, liquid entry, servicing, and damage requiring attention.
States that recording copyrighted material for personal use is illegal without permission.
Mentions the AC fuse is internal and not user-serviceable; contact service for issues.
Provides instructions on cleaning the unit using a soft cloth and mild detergent.
Advises checking voltage supply and setting the voltage selector for worldwide models.
Warns that unauthorized modifications may void user authority to operate.
States equipment compliance with Class B digital device FCC rules.
Confirms compliance with Canadian ICES-003 standards for digital apparatus.
Advises matching plug blades to slots for preventing electric shock.
Menu for initial hardware configuration settings.
Menu for configuring speaker connections, size, and distance.
Menu for setting up various input sources and formats.
Menu for fine-tuning audio parameters like tone and effects.
Explains which buttons can be programmed and how.
Instructions for customizing button and menu item labels on the remote.
Procedures for adding new devices or rearranging menu items for custom control.
Procedures for deleting and restoring buttons, devices, and macros on the remote.
Solutions for display, power, and device response issues.
Troubleshooting tips for macros not working or incorrect commands.
Explains error messages and provides guidance.
Clarifies button programming and macro creation.
Information on source switching and editing Home panel items.
How to reset the remote or revert to original configuration.
Steps to calibrate the remote's touchscreen if needed.
Details on the remote controller's LCD, buttons, memory, and ports.
Information on remote software features, IR range, and learning capabilities.
Specs on batteries, power management, physical dimensions, and operating temperature.
Details on power output, amplifier technology, and D/A converters.
Lists supported audio formats like THX, Dolby, and DTS, plus video capabilities.
Information on tuner presets, auto tuning, and RDS capabilities.
Highlights IntelliVolume, Character Input, and the touchscreen remote.
Instructions for installing AA batteries into the remote controller.
Guide for worldwide models to set the correct voltage before use.
Tips for proper remote operation, including sensor alignment and placement.
Explanation of the physical buttons and dials on the receiver's front panel.
Describes the indicators and multi-function display on the receiver's front.
Details on the power switch, standby button, and indicator.
Explains buttons for selecting audio sources and listening modes.
Covers master volume, display button, upsampling, and pure audio functions.
Information on Zone 2 level control and REC OUT/Zone 2/OFF buttons.
Details on FM mode, memory, setup, tuning, enter, and preset buttons.
Explanation of the VIDEO 5/VIDEO CAM INPUT terminals.
Covers mute, channel select, volume, power, listen, and setup buttons.
Explains how to select input sources and audio modes using the remote.
Details how to change listening modes like Direct, Stereo, and Surround.
Explains setup, return, test, and dim buttons for remote configuration.
How to adjust speaker levels and volume using CH Sel and +/- buttons.
Describes buttons for Dolby, DTS, THX, and All CH Stereo modes.
Details on CH +/-, VOL A/V, ON, OFF buttons for Zone 2 control.
How to select input sources for the remote zone.
Explains coaxial and optical digital audio connections.
Describes front panel terminals like speakers and digital inputs.
Overview of rear panel terminals including antenna and audio/video connections.
Details on pre-amplifier outputs and antenna connections.
Explains analog audio inputs/outputs and monitor video outputs.
Covers speaker terminals, AC outlets, and 12V trigger.
Instructions for connecting the power cord and AC inlet.
Information on 12V trigger and RI terminals for system control.
Details on IR input/output for remote extension and RS 232 for external control.
Describes composite and S-video inputs and outputs.
Explains connection for 5.1/7.1 channel audio sources.
Use of the GND terminal for turntables.
Steps for connecting a turntable using RCA and ground wires.
Guide for connecting CD players via analog and digital inputs.
Instructions for connecting tape decks, MD, DAT, or CD recorders.
How to connect DVD players using S-video, composite, or component video.
Guide for connecting DVD recorders using various video and digital connections.
Instructions for connecting VCRs using video and digital connections.
How to connect satellite tuners or TVs using S-video, composite, or component video.
Guide for connecting monitors or projectors to the receiver's output.
Instructions for connecting video cameras or game devices.
Recommendations for ideal speaker setup for surround sound.
Minimum requirements for surround sound playback.
Advice on optimal speaker placement for best sound quality.
Key considerations for placing front and surround speakers correctly.
Step-by-step guide for connecting speaker cables securely.
Instructions for connecting a subwoofer to the receiver's pre-out terminal.
Overview of connecting speakers for music in a separate zone.
How to connect Zone 2 speakers to the receiver's speaker terminals.
Guide for connecting Zone 2 speakers via the receiver's constant output.
How to connect Zone 2 speakers via pre-out terminals.
Troubleshooting steps if the remote signal doesn't reach the receiver's sensor.
How to use IR emitters to control other components remotely.
Instructions for setting up supplied FM indoor and AM loop antennas.
Steps for assembling the AM loop antenna.
Guide for connecting the AM antenna cable.
Considerations for installing an FM outdoor antenna.
Advice on using splitters for common FM/TV antennas.
Tips for installing an AM outdoor antenna effectively.
How to connect antennas using the 75/300 Ω adapter.
Steps for plugging in the power cord and setting the initial standby state.
How to turn the unit on and off using the front panel or remote.
Explanation of the unit's power backup system for memory.
Overview of the simplified setup menu for essential settings.
Overview of the comprehensive setup menu for detailed optimization.
How to navigate menus using the receiver's front panel buttons.
Steps for navigating menus using the intelligent remote controller.
Setting speaker impedance to match connected speakers (4 or 6 ohms).
Configuring the IR input for remote control signal reception.
Adjusting AM tuning steps for different regions (9 kHz vs 10 kHz).
Setting speaker size (Large/Small) and presence (Subwoofer, Center, Surround).
Detailed explanations for Subwoofer, Front, Center, Surround L/R, Surround Bk, and Powered Zone 2 settings.
Entering distances from each speaker to the listening position for timing.
Adjusting individual speaker volume levels using pink noise.
Setting bass peak level limiter and adjusting peak level for subwoofer/front speakers.
Configuring digital input sources (Coaxial/Optical) and formats for each input.
Enabling multichannel audio input for 5.1/6.1/7.1 channel sources.
Assigning digital input jacks (OPT/COAX) to input sources.
Setting signal type priority (All, Dolby Digital, DTS, PCM) for automatic detection.
Enabling multichannel input and selecting it via the audio selector.
Matching audio and video sources, and setting component video inputs.
Entering custom names for input sources and radio stations.
Setting volume levels for different input sources to ensure consistent output.
Assigning specific listening modes to different input source signal types.
Adjusting bass and treble levels for front speakers and subwoofer.
Deciding which speakers receive surround back signals (Surr L/R, Surr Back, or both).
Enabling/disabling sound effects like RE-EQ, Upsampling, Subwoofer, and Late Night.
Adjusting speaker delay times and subwoofer (LFE) levels.
Settings for mono playback and simulating theater-dimensional sound.
Adjusting listening angle, center presence, front expander, virtual surround, and dialog enhance.
Modifying Dolby Digital, DTS, and Pro Logic II surround modes.
Configuring THX listening modes, decoder selection, and THX Surround EX.
Settings for Mono Movie, Enhanced 7, Orchestra, Unplugged, Studio-Mix, TV Logic modes.
Customizing volume display, muting level, maximum volume, and power-on volume.
Adjusting headphone output volume to match speaker levels.
Changing OSD background color, superimpose mode, and immediate display.
Adjusting the on-screen display position for optimal viewing.
How to manually tune into FM and AM radio stations.
Tips for achieving stereo reception and using FM mode.
Steps to store favorite stations using the MEMORY button.
How to recall stored stations using PRESET buttons.
Procedure for deleting stored radio stations.
Explanation of Radio Data System (RDS) and its features.
Lists European PTY classifications for program scanning.
How to view text information broadcast by RDS stations.
Scanning for stations based on program type.
Scanning for stations broadcasting traffic program information.
Steps for selecting sources, playing media, and adjusting volume.
How to use the MUTE button to temporarily turn off audio.
Using Tone Control settings for bass and treble adjustments.
Connecting and using headphones with the receiver.
How to select different sound modes like Direct, Stereo, and Surround.
How to cycle through input source and program format information.
Setting the automatic turn-off timer for the receiver.
Temporarily changing individual speaker volume levels.
How to change the brightness of the front panel display.
Selecting between Auto, Multichannel, and Analog audio modes.
Steps for playing back multichannel audio sources.
Entering custom names for input sources and radio stations.
How to select sources and play music in the remote zone using the unit's buttons.
How to select input sources for Zone 2 using the intelligent remote.
How to control the volume for the remote zone using the remote controller.
Recording the currently selected audio/video signal to tape or other devices.
Recording a source different from the one being watched or listened to.
Combining video from one source with audio from another for custom recordings.
Basic steps for initial setup and operation of the remote controller.
How to add and operate devices using the remote's menus.
Identifying key buttons, modes, and functions of the remote controller.
Overview of the remote's customizable and programmable capabilities.
Explanation of dedicated buttons for frequently used functions.
How Left/Right and touchscreen buttons function and can be programmed.
Navigating Home, Macro, Control Panel, and Device menus.
Instructions for installing and replacing AA batteries.
Steps to turn on the remote display and activate backlight.
How to set up the remote to control specific brands of devices.
Selecting a device brand from a pre-installed list.
Navigating brand lists and using the virtual keyboard for selection.
Using search mode to find RC codes when brand is not listed.
Choosing a device to operate via Home or Device menus.
Accessing device controls through the Home menu.
Switching between device controls without returning to Home.
Using touchscreen, Left/Right, direct-access buttons, and scrolling through panels.
How to adjust remote controller settings like contrast and backlight.
Explanation of the first, second, and third setup panels for configuration.
Overview of the remote's advanced features and customization.
Switching between Use, Learn, Label, Add, Delete, Move, and Brand modes.
Explains which buttons can be programmed and how.
Steps to program individual buttons on the control panels.
How to program global or device-specific functions for these buttons.
Assigning commands to device items, which updates Home menu buttons.
Customizing labels for buttons using the virtual keyboard.
Labeling items within device menus for easier navigation.
Procedures for adding new devices or rearranging menu items.
Changing the order of items in Device and Macro menus.
Removing or restoring programmed buttons and their functions.
Procedures for deleting and restoring device or macro menu items.
Steps to record sequences of commands into macros.
Modifying recorded macros, including adding delays.
Scheduling devices to activate at specific times using timers.
Modifying existing timer settings.
Creating groups to manage macros and timers effectively.
Using ChadEdit software for advanced remote controller personalization.
Minimum system requirements for using ChadEdit software.
Solutions for display, power, and device response issues.
Troubleshooting tips for macros not working or incorrect commands.
Explains error messages and provides guidance.
Clarifies button programming and macro creation.
Information on source switching and editing Home panel items.
How to reset the remote or revert to original configuration.
Steps to calibrate the remote's touchscreen if needed.
Details on the remote controller's LCD, buttons, memory, and ports.
Information on remote software features, IR range, and learning capabilities.
Specs on batteries, power management, physical dimensions, and operating temperature.
Solutions for power-related problems like immediate shutoff or no sound.
Troubleshooting center speaker and subwoofer audio problems.
Solutions for AM reception, noise, and stereo reception problems.
Addresses problems with picture display, OSD, and sound output.
Troubleshooting Late Night, Re-EQ, Multichannel audio, and Zone 2 operation.
Explains specific error messages and provides troubleshooting steps.
Detailed technical specifications for the amplifier section.
Technical specifications for the FM and AM tuner sections.
Power supply, consumption, dimensions, and weight specifications.
General
