68
To enter a space, tap the lower left corner of the keyboard. When
the keyboard is zoomed in, tap the empty key.
After you have typed the character, the keyboard is zoomed out.
Repeat this action for every character.
Every time you enter a character, the list displays the brands that
match the character(s). The remote controller makes a pre-
selection of the (first) brand that matches. You only have to type
as many characters as needed to display your brand.
Getting Started
Note:
In case, your brand is not displayed in the list of brands, Try Search
mode. See “Defining brands by searching” on page 69.
5. Select your brand from the list.
The selected brand will be highlighted. The Search button
switches into Next.
6. Tap Next.
When your brand uses only one set of RC codes, the remote
controller switches to Try mode. Go to step 9.
When there are several code sets for your brand, the following
screen appears.
Notes:
• The code sets are ranked. The first code set in the list is used
for most devices of the selected brand.
• When you do not know which code set to select from the list,
you can use Search mode. See “Defining brands by
searching” on page 69.
7. Select a code set from the list.
The selected code set will be highlighted. The Search button
switches to Next.
8. Tap Next.
The remote controller switches to Try mode. The first control
panel of the selected device is displayed.
9. Try the buttons on the different control panels and
check if the device is responding to the RC codes the
remote controller is sending.
Note:
However, your device is responding to the current code set, it is
recommended to try other code sets. When your device responds
to more than one code set, install the most suitable one.
10. If you are not satisfied with the way the device is
responding to the selected code set, tab Back to
select another code set.
or
When you are satisfied with the selected code set,
tap Install.
When the RC codes for your devices are installed, the remote
controller beeps and returns to Use mode. Your brand is now
defined for the selected device.
11. Define all other devices in the Home menu you want
to operate.
To Next Page
Loading...
Need help?
General
