52
3. Press the ENTER button.
The TX-DS898 will scan until it reaches a
station broadcasting traffic information. If
“Not Found” appears on the display, a TP
station cannot be located.
2. Press the RT/PTY/TP button three
times.
Listening to RDS broadcasts
Displaying Radio Text (RT)
If the station you are currently tuned into is broadcasting RT signals,
they will be displayed in the front display on the TX-DS898. If the
station does not, this function will be ignored.
1. To display the radio text, press the
RT/PTY/TP button once.
3. Using the / buttons, select the
PTY program type you desire.
4. Press the ENTER button.
The TX-DS898 will scan until it reaches a
station of the program type you selected. It
will then stop briefly at that station before
continuing on until it reaches the next
station. Pressing the ENTER button stops
the PTY scan at that point. If you press the
RT/PTY/TP while “NONE” is displayed,
“PTY ?” will appear. In this case, return to
step 3.
5. Press the ENTER button when it
reaches the station that you want to
listen to.
“Not Found” will appear when no RDS
signal is being received from the station.
“[TP]” will appear if the current station is broadcasting TP
signals. This station will periodically broadcast traffic
information. To find a different station, proceed to the next step.
Also, if “TP” is displayed, proceed to the next step.
Performing a PTY scan
1. Press the FM input source button.
2. Press the RT/PTY/TP button twice.
The current program type appears on the
display.
Performing a TP scan
1. Press the FM input source button.
• If the current station you are listening to is not an RDS station,
only the frequency of the station appears.
• If “Waiting” appears on the display, more time is required to
receive the RT information. When the information is received,
the characters will scroll across the front display.
• If “No Text Data” appears on the display, RT information is not
available.
• The display shows the frequency for 3 seconds and returns to
program service name.
ENTER
ENTER
ENTER
STANDBY/ON
OFF
ON
POWER
STANDBY
MASTER VOLUME
FM
AM
PHONO
C
D
TAPE
DVD
VIDEO
3
VIDEO
5
VIDEO
4
VIDEO
2
VIDEO
1
AUDIO
SELECTOR DISPL
AY
PURE AUDIO UPSAMPLING
PHONES
ZONE
2
LEVEL
STEREO SURROUND
THX DSPREC OUT ZONE
2
OFF DIMMER
FM MODE MEMORY
SETUP
CLEAR
ENTER
RETURN
VIDEO
5
/VIDEO CAM INPUT
TUNING PRESET
S VIDEO AUDIO
VIDEO L R
DIGITAL
RT/PTY/TP
PRESET
FM
/
ENTER
RT/PTY/TR
FM
RT/PTY/TR
PRESET
FM
RT/PTY/TR
To Next Page
Loading...
Need help?
General
