EasyManuals Logo

Onkyo TX-NR1008 Quick Setup

Onkyo TX-NR1008
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
 

(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved. SN 29400349



























* 2 9 4 0 0 3 4 9 *
Listener
Please connect
,
,
,
,
and
, when connecting 5.1-channel surround.
1/2''-5/8''
(12-15mm)
Speaker Confi guration
5.1-channel:
7.1-channel:
+
9.1-channel:
+
+

9.1-channel:
+
+
��

QUICK SETUP
Model: TX-NR1008

Other manuals for Onkyo TX-NR1008

Questions and Answers:

Onkyo TX-NR1008 Specifications

Power IconPower
power output front L/R180 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
power output center180 W (6 Ω, 1 kHz, 1 channel driven, IEC)
power output surround L/R180 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
power output surround back L/R180 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
power output front high L/R, front wide L/R, or zone 2/3 L/R180 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
dynamic power 3 Ω front300 W
dynamic power 4 Ω front250 W
dynamic power 8 Ω front150 W
power consumption830 W
Audio Specifications IconAudio Specifications
thd (total harmonic distortion)0.08% (Rated power)
damping factor60 (Front, 1 kHz, 8 Ω)
input sensitivity and impedance line200 mV/47 kΩ
input sensitivity and impedance phono mm2.5 mV/47 kΩ
rated rca output level and impedance200 mV/470 Ω (Pre out)
maximum rca output level and impedance4.6 V/470 Ω (Pre out)
phono overload70 mV (MM, 1 kHz, 0.5%)
frequency response5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)
tone control bass±10 dB, 50 Hz
tone control treble±10 dB, 20 kHz
signal-to-noise ratio line110 dB (IHF-A)
signal-to-noise ratio phono80 dB (IHF-A)
speaker impedance4 Ω–16 Ω or 6 Ω–16 Ω
Video Specifications IconVideo Specifications
input sensitivity/output level and impedance video1.0 Vp–p/75 Ω (Component and S-Video Y)
input sensitivity/output level and impedance component pb/cb, pr/cr0.7 Vp–p/75 Ω
input sensitivity/output level and impedance s-video c0.25 Vp–p/75 Ω
input sensitivity/output level and impedance composite1.0 Vp–p/75 Ω
component video frequency response5 Hz–100 MHz/0 dB, -3 dB
Tuner Specifications IconTuner Specifications
tuning frequency range fm87.5 MHz–108 MHz
tuning frequency range am522 kHz–1, 611 kHz
fm/am preset memory40 stations
Weight and Dimensions IconWeight and Dimensions
dimensions435 x 198.5 x 435.5 mm
weight18.7 kg
carton dimensions587 x 337 x 553 mm
carton weight23.5 kg

Related product manuals