To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR626 and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 5 - 100000 Hz |
| Pre-out channels | 2 SW |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 160 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 6 |
| Composite video in | 5 |
| Digital audio coaxial in | 2 |
| Digital audio optical in | 1 |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | - |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Last.fm, Spotify |
| Optical drive included | No |
| Supported video modes | 1080p |
| Product color | Silver |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Damping factor | 60 |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 600 W |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 10000 g |
Crucial safety guidelines for operating the AV receiver safely and preventing hazards.
Guide to connecting speaker systems for optimal surround sound setup.
Steps for connecting external audio and video sources to the receiver.
Guided process for initial configuration of the AV receiver.
Automatic speaker calibration using the included microphone for room acoustics.
Detailed settings for speaker type, size, and crossover frequencies.
Explanation and settings for Audyssey, Dynamic EQ, and Dynamic Volume technologies.
Solutions for common problems and error messages encountered with the receiver.
