Onkyo TX-NR838 - Front Panel Overview

18
Front Panel
1
Front flap
2
z
ON/STANDBY button: Turns the unit on or into
standby mode.
3
PURE AUDIO button and indicator: Switches to the
Pure Audio listening mode. The indicator lights when
Pure Audio listening mode is set.
4
Remote control sensor: Receives signals from the
remote controller.
5
BLUETOOTH indicator: Flashes while pairing with a
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
6
Wi-Fi indicator: Stays lit while the unit is connected to
the wireless LAN router.
7
Input selector buttons: Switches the input to be
played.
8
Display
9
MASTER VOLUME control and indicator: Allows you
to adjust the volume.
F
HYBRID STANDBY indicator: Lights if the unit enters
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
G
PHONES jack: Stereo headphones with a standard plug
are connected.
H
ZONE 2 button, ZONE 3 button and OFF button:
Controls the multi-zone function.
I
TONE and Tone Level buttons: Adjusts the high tone
and low tone.
J
MONITOR OUT button: Allows you to select the HDMI
jack to output the video input signals that are input to
the unit.
K
DISPLAY button: Switches the information on the
display.
L
QUICK SETUP button: Displays the Quick Setup menu.
M
HOME button: Displays the HOME menu.
N
Cursor buttons, TUNING
l j
button, PRESET
d c
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune into the station with TUNING
l j
or
select the registered station with PRESET
d c
.
O
RETURN button: Returns the display to the previous
state.
P
DIMMER button (North American models): Switches
the brightness of the display.
RT/PTY/TP button (European, Australian and Asian
models): Can be used when receiving the station
transmitting text information.
GH JLK N P V WI MOQR S T U
21 36 8745 F9
(European,Australian
andAsianmodels)
1.
2.