How to fix HDMI control on Onkyo TX-NR838?
If your Onkyo Receiver's HDMI control isn't working correctly, ensure you turn on the CEC link function on the unit. You'll also need to enable the HDMI linked system setting on your TV.
General| Receiver type | Surround |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Pre-out channels | 7.2 |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 300 W |
| Dynamic power per channel (4 Ohm) | 250 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Power output per channel (20-20KHz@8 Ohm) | 180 W |
| HDMI in | 7 |
| Composite video in | 4 |
| Digital audio coaxial in | 3 |
| Digital audio optical in | 2 |
| Component video (YPbPr/YCbCr) in | 1 |
| Speakers connectivity type | - |
| Ethernet LAN | No |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1610 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Pandora, Spotify, TuneIn |
| Display | LCD |
| Product color | Black |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio, THX Surround EX |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 720 W |
| THX-certified | THX Select2 Plus |
Weight and Dimensions| Depth | 198.5 mm |
|---|---|
| Width | 435 mm |
| Height | 400 mm |
| Weight | 15500 g |
To Next Page
