EasyManuals Logo

Onkyo TX-SR500 Basic Operation Guide

Onkyo TX-SR500
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TX-SR500
Basic Operation Guide
Introduction
This Guide describes basic operation of this receiver and connected devices (CD, DVD etc.). For further information about the advanced
functions of this receiver, please refer to the main instruction manual.
This Guide does not explain connection details for the unit’s rear panel. Please refer to pages 10-16 of the main instruction manual for
correct connection information. Otherwise, the entire A/V system may not work properly.
A remote controller is used in the examples described here. For more information on the remote controller, refer to the main instruction
manual.
Enjoying audio and visual sources
REMOTE
CONTROL
R
L
R
L
R
L
IN
IN
IN
COAXIAL
OPTICAL
12
IN
IN
IN
IN
FRONT
SURR
CENTER
SUB
WOOFER
VIDEO 2
VIDEO 1
OUT
OUT
OUT
DIGITAL INPUT
VIDEO 2
VIDEO 1
DVD MONITOR
OUT
VIDEO
S VIDEO
DVD
TAPE
CD
FRONT
SPEAKERS A
FRONT
SPEAKERS B
SURROUND
SPEAKERS
CENTER
SPEAKER
L
R
L
R
ANTENNA
FM
75
AM
SUBWOOFER
PRE OUT
AC OUTLET
1. 2. 3.
Front right
speakers
Front left
speakers
Important notes
If MUTING function is activated, the sound will be muted. Make sure MUTING is set to OFF.
If the headphones are connected, no sound will be heard from the speakers. Do not connect headphones if you wish to listen
to the sound from the speakers.
To enjoy surround sound, place the speakers properly as described in “Positioning speakers/
Connecting speakers” on pages 12-13, and make necessary settings as described in “Speaker setup” on
pages 18-20.
All manuals and user guides at all-guides.com
all-guides.com

Other manuals for Onkyo TX-SR500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-SR500 and is the answer not in the manual?

Onkyo TX-SR500 Specifications

General IconGeneral
Channels5.1
Frequency Response10 Hz-100 kHz
Weight18.7 lbs
Signal-To-Noise Ratio100 dB
Input Impedance47 kOhm
Input Sensitivity200 mV
Surround System Class5.1 channel
Digital Sound Processor (DSP)Yes
DSP Preset Qty5
Tuner BandsAM/FM
Preset Station Qty30
HDMINo
Total Harmonic Distortion0.08 %
Video Inputs3 x composite video
Video Outputs1 x composite video
Audio Formats SupportedDolby Digital, DTS
Response Bandwidth10 Hz-100 kHz
Audio D/A Converter24-bit, 96 kHz
Built-in DecodersDolby Digital, DTS
Surround Sound EffectsDolby Pro Logic II
Digital Audio Inputs2 x optical, 1 x coaxial
Dimensions (W x H x D)17.1 in x 5.9 in x 14.8 in
Speaker Impedance6 Ω
Inputs4 x analog audio, 2 x digital optical, 1 x digital coaxial

Related product manuals