Connecting Your AV Components--Continued
• Turntable with an MC-type (Moving Coil) Cartridge
Use an RCA/phono audio cable to connect the TX-SR501/
TX-SR50 IE's L/R TAPE IN connectors to the audio outputs
on your phono preamp. Use another RCA/phono audio cable
to connect the phono preamp's inputs to your MC head amp's
outputs. And use another RCA/phono audio cable to connect
the MC head amp's inputs to your turntable, as shown,
• Using Coaxial or Optical Connections (playback only)
• Use a coaxial digital audio cable to connect the TX-SR501/
TX-SR501E's COAXIAL DIGITAL INPUT to the coaxial
output on your DAT or CD/MD recorder, as shown.
OR
• Use an optical digital audio cable to connect the
TX-SR501/TX-SR501E's OPTICAL 2 DIGITAL INPUT
to the optical output on your DAT or CD/MD recorder, as
shown.
Use an RCA/phono audio cable to connect the TX-SR501/
TX-SR501E's L/R TAPE IN connectors to the cassette
recorders outputs, and use another RCA/phono audio cable
to connect the TX-SR501/TX-SR501E's L/R TAPE OUT
connectors to the cassette recorders inputs, as shown.
Connectoneor the other/
DAT or CD/MD
recorder
You may need to change the input source to digital input
assignments (see page 24).
• Using Analog Connections (recording & playback)
Use an RCA/phono audio cable to connect the TX-SR501/
TX-SR501E's L/R TAPE IN connectors to the DAT or CD/
MD recorder outputs, and use another RCA/phono audio
cable to connect the TX-SR501/TX-SR501E's L/R TAPE
OUT connectors to the DAT or CD/MD recorder inputs, as
shown.
IN
DATorCD/MDrecorder
18
To Next Page
Loading...
