FIRMWARE UPDATE -3
TX-SR875
Installation Procedure
3. Install the software by following instructions that will appear step by step on the window.
If “App_Updater_875.zip” has already been unzipped in “Preparation for Update” in FIRMWARE UPDATE -1,
return to Step 1 of Update Procedure.
5. Return to Step 1 of Update Procedure in FIRMWARE UPDATE -1.
4. Find “Firmware” folder which has been created in the folder where the software has been installed.
Copy “SR875” folder from “Setup_Updater875E” to under the “Firmware” folder.
Preparation for Update (Main)
1. "Setup_Updater875E.zip" Unzip this file in advance. (File name depends on the version.)
1. Exit from every running application software.
2. Double click "setup.exe" in the folder extracted from "Setup_Updater875E.zip.”
Software
Copy
To Previous Page
Loading...
