Need help?Do you have a question about the Onkyo TX-SV636 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Tuning range | FM |
| Power output | 80 watts per channel |
| Total harmonic distortion | 0.08% |
| Input sensitivity | 200mV (line) |
| Signal to noise ratio | 100dB (line) |
| Video Connections | composite |
| Tuning Range (FM) | 87.5 to 108 MHz |
| Tuning Range (AM) | 530 to 1710 kHz |
| Signal-to-Noise Ratio (FM) | 70 dB |
| Total Harmonic Distortion (FM) | 0.3% |
Determine the proper voltage for your area: 220-230V or 120V.
Details on Dolby Pro Logic, Theater, Hall, Live, and Arena surround modes for immersive audio.
Details on setting up Onkyo and Xantech Multi-Room Systems for remote operation.
Guidance on optimal speaker placement for immersive surround sound.
Recommendations for positioning front left and right speakers for optimal sound.
Instructions for placing one or two center speakers for surround sound.
How to set up the IPM function when connecting a monitor TV.
How to set up the IPM function when connecting a Video Disc Player.
Instructions for connecting external power amplifiers to PRE OUT terminals.
Instructions for connecting front, rear, and remote speakers for surround effects.
Steps to control Onkyo RI components from a sub-room.
Steps to control non-Onkyo components from a sub-room using emitters.
Detailed steps for controlling Onkyo RI components remotely.
Detailed steps for controlling non-Onkyo components remotely using emitters.
Instructions for connecting the AC power supply cord to the unit.
How to manually tune FM or AM radio frequencies.
Steps to store radio station frequencies into memory presets.
Explanation of Radio Data System services like PS, PTY, TP, and RT.
How to search for stations based on program type (PTY).
Steps to input custom names for memorized radio stations.
Steps for recording or dubbing audio to a tape deck connected to TAPE-1.
Steps for recording or dubbing audio to a tape deck connected to TAPE-2.
Step-by-step guide to selecting and activating surround modes.
Guide to adjusting surround parameters using the on-screen display.
Detailed steps for adjusting Dolby Pro Logic surround settings.
Detailed steps for adjusting parameters for Dolby surround sound.
Adjusting parameters for the Theater surround mode.
Using test tone to adjust rear and center speaker volume levels.
How delay time affects acoustic size and room impression.
Adjusting theater and hall size parameters for different room acoustics.
Adjusting effect, reverb levels, and reverb time for concert hall simulation.
Configuring the main/sub selector and MR OFF for remote listening.
Solutions for power and sound problems, including connection checks.
Troubleshooting center speaker sound and low-frequency noise.
Solutions for howling, scratchy sound, and unclear high frequencies.
Technical details for the amplifier section, including power output and distortion.
To Next Page
