Need help?Do you have a question about the Onkyo TX-SV424 and is the answer not in the manual?
Amplifier Section| IF Rejection Ratio | 90 dB |
|---|---|
| Power Output - Front L/R channels | 60 watts per channel, min. RMS at 8 ohms |
| Power Output - Continuous | 2 x 65 watts at 8 ohms, 1 kHz (DIN) |
| Total Harmonic Distortion - Front | 0.08% at rated power |
| Damping Factor | 60 at 8 ohms (Front) |
| Frequency Response | 30 Hz — 15 kHz, +1.5 dB |
Power Supply| U.S.A. & Canadian models | AC 120 V, 60 Hz |
|---|---|
| European & Australian models | AC 230 V, 50 Hz |
| Worldwide models | AC 220 V and 120 V switchable, 50/60 Hz |
Tuner Section| FM Tuning Range | 87.5 — 108.0 MHz |
|---|---|
| Usable Sensitivity - Mono | 11.2 dBt, 1.0 uV (75 ohms) |
| Usable Sensitivity - Stereo | 17.2 dBf, 2.0 uV (75 ohms) |
| 50dB Quieting Sensitivity - Mono | 18.2 dBf, 2.2 uv (75 ohms) |
| 50dB Quieting Sensitivity - Stereo | 38.2 dBf, 22 UV (75 ohms) |
Weight and Dimensions| Dimensions (W x H x D) | 455 x 150 x 32? mm |
|---|---|
| Weight | 9.6 kg |
| Weight (Remote Control) | 110 grams |
Details the amplifier's power output for stereo and surround modes.
Explains Dolby Pro Logic and Hall Surround features for enhanced audio experience.
Highlights the discrete output stage for driving low-impedance speakers.
Describes the subwoofer output for deep bass impact.
Explains the RI remote control for operating multiple Onkyo components.
Lists convenient features like multiple inputs, presets, and auto-tuning.
Explains the unit's battery-free memory backup system and its behavior.
Covers essential precautions for safe operation, cleaning, and placement.
Details precautions related to power cords, grounding, polarization, and liquid entry.
Outlines safe usage, ventilation, and servicing guidelines to prevent hazards.
Information on warranty card, serial number, and recording copyright.
Instructions on how to clean the unit safely and effectively.
Guidance on power supply voltage and setting the voltage selector.
Lists standard and optional accessories provided with the unit.
Identifies and describes the function of each control on the front panel.
Explains the various indicators and displays on the unit.
Identifies and explains the function of each button on the remote control.
Provides instructions for installing batteries and general usage tips for the remote.
Guides on connecting turntables and CD players to the unit's input jacks.
Details how to connect one or two tape decks, including with a graphic equalizer.
Instructions for connecting video disc players and VCRs to VIDEO-1 and VIDEO-2 inputs.
Explains how to connect a subwoofer using the MONO OUT jack.
Guides on connecting a TV for monitoring video output.
Information on the switched AC outlets and their capacity limits.
Instructions for connecting front speaker pairs, including impedance considerations.
Details on connecting center and rear surround speakers and impedance requirements.
Explains how to connect Onkyo components using RI for remote control integration.
Lists tape deck and CD player controls accessible via the RI system.
Guides on connecting antenna cables using the 75/300 ohm adapter for worldwide models.
Advises on using a directional linkage type splitter for common FM/TV antennas.
Instructions for assembling the AM loop antenna.
How to connect and position the T-shaped indoor FM antenna for optimal reception.
Recommendations for installing an external FM antenna away from noise sources and power lines.
Guidance on positioning the AM loop antenna and advice on external AM antennas.
How to turn the unit on/off and select speaker outputs (A/B).
Explains the use of Master Volume, Bass, Treble, Selective Tone, and Balance controls.
How to connect and use headphones with the unit.
Instructions for temporary muting and setting the sleep timer for automatic power-off.
How direct function simplifies source switching with RI-connected components.
How to tune FM and AM stations using UP/DOWN buttons or direct tuning.
How to achieve stereo reception and handle weak signals with FM MUTE/MODE.
Steps to store favorite FM/AM stations into memory groups (A, B, C).
How to select stored stations using group selection and scan or direct input.
Method to clear stored station memory.
Guidelines for optimal placement of surround speakers for movie theater sound effects.
Recommendations for placing the center speaker relative to screens.
Tips for positioning rear speakers to enhance sound shifting effects.
Advice on placing the subwoofer for powerful bass sounds.
Explains the different surround modes like DOLBY PRO LOGIC, HALL, and BY-PASS.
Details the NORMAL, WIDEBAND, and PHANTOM modes for the center speaker.
How to use the test tone to adjust speaker volume levels for optimal surround sound.
How to set the delay time for rear speakers to tailor acoustic space.
Step-by-step guide to using the test tone and remote for precise speaker volume adjustment.
How to select modes, play sources, and adjust master volume for the best experience.
Guide to selecting sources and recording audio onto tape decks.
Instructions for copying audio from one tape deck to another.
How to monitor audio signals during recording and playback.
How to connect and use a graphic equalizer for recording audio.
Guides on recording video discs to VCR and adding sound during video editing.
Solutions for problems like no power, no sound, or center speaker issues.
Troubleshooting tips for hum, howling, static, AM/FM reception, and buzzing noise.
Solutions for remote control malfunctions and preset recall problems.
Detailed technical specifications for the amplifier and tuner sections.
Covers general unit specifications and remote control details.
To Next Page
