Need help?Do you have a question about the Onkyo TX-108 and is the answer not in the manual?
General| Tuning Bands | FM, MW |
|---|---|
| Type | Stereo Tuner |
| Tuning Scale | Analog |
| FM Tuning Range | 87.5 - 108 MHz |
| MW Tuning Range | 530 to 1600 kHz |
| Signal to Noise Ratio (MW) | 40dB (MW) |
| Frequency Response | 30 - 15, 000 Hz |
| Output Level (MW) | 150mV (MW) |
Read all safety and operating instructions and heed all warnings on the appliance.
Avoid water, heat, and ensure proper ventilation for safe operation.
Protect power cords and ensure grounding means are not defeated.
Refer to qualified personnel for service; do not attempt repairs.
Ensure voltage selector matches local supply; check model specifications.
Guidance on connecting FM/AM antennas and speaker systems.
Connect turntable to PHONO jacks and ground terminal; follow precautions.
Connect tape decks and equalizer to TAPE-1/TAPE-2 jacks.
Switch audio sources while viewing video sources.
Adjust level for rich low-range sound playback.
Select audio/video sources like TUNER, PHONO, CD, TAPE, VCR.
Produces powerful, realistic sound by modulating audio.
Place stations in memory using preset keys; MEMO indicator confirms.
Raise or lower tuned frequency manually or automatically.
Adjusts overall sound level manually or via remote.
Recall or store FM/AM stations; indicators show usage.
Controls amplifier, tuner, cassette deck, and turntable functions.
Select audio or video source for playback.
Listen to FM or AM broadcasts; confirm TAPE-2 monitor is off.
Operate unit functions remotely after switching main power on.
Check AC fuse or system power switch.
Check tape monitor, connections, or amplifier protection.
Troubleshoot hum, howling, rough sound, buzzing, crackling noises.
Address distorted sound, flickering indicators, or no station recall.
Details on power output, distortion, frequency response, and sensitivity.
Specifications for FM and AM tuning, sensitivity, and selectivity.
To Next Page
