Onkyo X3 User Manual

9EN
5 Other features
Listen to an external device
With this speaker, you can also listen
to an external audio device such as an
MP3 player.
1 Make sure there is no music streaming
from the connected Bluetooth device (if
available).
2 Connect an audio input cable with a
3.5 mm connector on both ends to
• the AUX IN socket on this speaker,
and
• the headphone socket on the
external device.
3 Play music on the external device (refer
to its user manual).
» The speaker switches to the AUX IN
source.
Tip
•
When you start music streaming from a connected
Bluetooth device, the speaker switches to the
Bluetooth source automatically.
Charge your mobile device
1 Connect a USB charging cable to
• the USB output socket on this
speaker, and
• the USB input socket on the
external device.
2 Check that the speaker is switched on
or in standby mode.
Adjust volume
• Press +/- on the speaker to increase or
decrease the volume.

Onkyo X3 Specifications

General

Brand	Onkyo
Model	X3
Category	Speakers
Language	English