Onkyo X3 User Manual

7EN
4 Use Bluetooth
devices
With this speaker, you can listen to audio
from Bluetooth-enabled devices and control
the incoming call through Bluetooth.
Connect a Bluetooth-
enabled device
Note
•
Make sure that your Bluetooth device is compatible
with this speaker.
• Before pairing a device with this speaker, read its
user manual for Bluetooth compatibility.
• The speaker can memorize a maximum of two
paired devices.
• Make sure that Bluetooth function is enabled on
your device, and your device is set as visible to all
other Bluetooth devices.
• Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that
may cause interference.
• The operational range between this speaker and
a Bluetooth device is approximately 10 meters
(30 feet).
The speaker can connect up to 2 Bluetooth-
enabled devices at the same time.
1 Press and hold on the speaker for two
seconds.
» The Bluetooth indicator flashes
blue.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices (refer to the user manual of the
device).
3 When [Onkyo X3] is displayed on your
device, select it to start pairing and
connection. If necessary, enter the
default password “0000”.
» After successful pairing and
connection, the speaker beeps
twice, and the Bluetooth indicator
turns solid blue.
4 Repeat steps 1 to 3 to add a second
Bluetooth device.
Onkyo X3

Onkyo X3 Specifications

General

Brand	Onkyo
Model	X3
Category	Speakers
Language	English