To Next PageTo Next Page
Need help?Do you have a question about the Online USV ZINTO E 1500 and is the answer not in the manual?
Final steps to bring the UPS system online and verify its operational status.
Guide to navigating and changing various operational settings of the UPS system.
Connecting the UPS to a computer via RS-232 or USB for data exchange.
How to connect and use the emergency power-off function for safety.
Detailed instructions and safety precautions for replacing the UPS system batteries.
How to charge and test newly installed UPS batteries to ensure functionality.
Lists potential causes and measures for various alarm signals and status indicators on the UPS.
Common operational faults and their corresponding solutions for the UPS system.
Detailed technical data, electrical properties, and connections for ZINTO E models.
General| Apparent Power | 1500 VA |
|---|---|
| Output Voltage | 230 V |
| Input Voltage | 230 V |
| Output Frequency | 50/60 Hz |
| Input Frequency | 50/60 Hz |
| Topology | Line Interactive |
| Waveform Type | Sine wave |
| Input Voltage Range | 162-290 V |
| Frequency Accuracy | ±1% |
| Typical Backup Time at Full Load | 5 minutes |
| Display | LCD |
| Communication Ports | USB |
| Transfer Time | Typical 2-6 ms, 10ms max. |
| Waveform | Sinewave |
| Battery Type | Sealed Lead Acid |
