Listening to the radio
1.
Press POWER to turn on the unit.
2.
Press AM/FM to select a band (AM or FM).
3.
FPress TUNE-/TUNE+ to tune in to a station.
4.
Press VOL-/VOL+ to adjust the volume.
Setting radio presets
1.
Press TUNE-/TUNE+ to tune your clock radio to the station you want to save.
2.
Press and hold MEM, The preset number blinks.
3.
Press TUNE-/TUNE+ repeatedly to select the preset number you want.
4.
Press MEM again to store the station as a preset. The preset number stops blinking.
5.
Repeat steps 1 through 4 to save additional stations as presets.
Note:
There are 10 preset locations for FM and AM band.
To Next Page
Loading...
