Fragment threshold: Set the fragmentation threshold of the frame.
The basic principle of fragmentation is to divide a large frame into smaller fragments, and
each fragment is transmitted and confirmed independently. When the part of the frame power
transmission needs to be re-sent, thereby improving the throughput of frame transmission.
In an environment with a high bit error rate, the fragmentation threshold can be appropriately
lowered, so that if the transmission fails, only the unsuccessful part needs to be re-sent,
thereby increasing the throughput of frame transmission.
In a non-interference environment, appropriately increasing the fragmentation threshold can
reduce the number of frame confirmations and improve the throughput of frame transmission.
3.Network settings
3.1 LAN settings
Modify the IP mode of the device, automatically obtain or static IP.
3.2 VLAN settings
Divide multiple groups of CPE into different vlan segments, and separate each group
of bridge data.
3.3 DHCP server
Turn on DHCP to issue an IP address to the terminal.
3.4 DHCP client list
CPE wireless bridging method, connecting the peer CPE, MAC address, IP address
and other information of this equipment.
3.5 MAC authentication
Black and white list function, only allow a certain device to access, or only prohibit a
certain device to access.
To Next Page
Loading...
Need help?
General