4. More settings
4.1 LAN port rate
WAN port and LAN port, 10M/100M full-duplex and half-duplex rates are optional,
auto-negotiation by default.
4.2 Network diagnosis
Signal scanning: Scan the surrounding wifi signals and check the signal strength.
Ping: IP address ping packet test, you can choose the number of ping packets and
bytes to verify the transmission effect.
4.3 Network Service
The device can be set to restart regularly to clear the cache.
5. System Tools
5.1 System time
Network time and manual time, and time zone selection.
5.2 Equipment management
Operation options such as upgrade, reset, backup, and restart.
5.3 User Management
The access password of the WEB interface can be modified.
5.4 System Log
You can check whether the equipment is stable for a long time.nd bytes to verify the
transmission effect.
4.3 Network Service
The device can be set to restart regularly to clear the cache.
To Next Page
Loading...