Onyx DX20 User Manual

1
081320 Rev. 1
______________________________________________________________________________________
INTRODUCTION
______________________________________________________________________________________
This safety manual is furnished with each new
model. It provides necessary operation and
maintenance instructions.
Read this manual completely and understand the
machine before operating or servicing it.
This machine will provide excellent service.
However, the best results will be obtained at
minimum costs if:
• The machine is operated with reasonable
care.
• The machine is maintained regularly - per the
maintenance instructions provided.
• The machine is maintained with manufacturer
supplied or equivalent parts.
To view, print or download manuals online visit
www.onyxsolutions.com/manuals.
ONYX Systems LLC
12703 Commerce Station Drive
Suite 200
Huntersville, NC 28078
Phone: (800) 858-3533
www.onyxsolutions.com
_____________________________________________________________________________________
INTENDED USE
______________________________________________________________________________________
The automatic floor scrubber is intended for
commercial use, for example factories, shops,
offices and rental in hotels, schools, hospitals,
businesses. It is designed to scrub hard floor
surfaces (concrete, tile, stone, synthetic, etc.) in
an indoor environment. This machine is not
intended for cleaning carpets or sanding wood
floors. Use only recommended pads/brushes and
commercially available floor cleaning detergents.
Do not use this machine other than described in
this Operator Manual.
______________________________________________________________________________________
MACHINE DATA
______________________________________________________________________________________
Please fill out at time of installation for
future reference.
MODEL NO.- _________________________
SERIAL NO. - _________________________
INSTALL DATE - _______________________
______________________________________________________________________________________
UNCRATING MACHINE
Carefully check machine for signs of damage.
Report damages at once to carrier.
To uncrate the machine, remove straps, wheel
blocks and shipping brackets. Using the supplied
ramp carefully back the machine off the pallet.
Make sure scrub head is in the raised position.
ATTENTION: Do not remove machine from pallet
without using ramp, machine damage may occur.

Onyx DX20 Specifications

General

Brand	Onyx
Model	DX20
Category	Floor Machine
Language	English