EasyManua.ls Logo

Ooni Koda - Lighting; Lighting Procedure; Flame Safety Device (FSD); Flame Control Indicators

Ooni Koda
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Once your regulator is connected, open up the gas from your
propane tank.
Push in and slowly turn the control knob counter-clockwise
until you hear a click and the burner ignites.
Continue to push in the control knob for 5 seconds after
ignition and then release.
Ooni Koda should run quietly when lit. If you hear a roaring
noise from the gas burner, switch the gas o for 5 minutes and
re-light.
What to do if the flames go out?
Our priority is for you to enjoy Ooni Koda in a safe and fun
environment and Ooni Koda has a Flame Safe Device (FSD)
built in. For safety reasons, if the flame is extinguished while
the gas supply is on, the FSD will automatically cut o the gas
supply in to Ooni Koda safely.
If you notice that the flames have gone out, turn o the gas
supply and detach Ooni Koda from the propane tank.
Leave for 5 minutes before re-lighting.
Lighting
O
Push, slowly turn and
hold for 5 seconds to light
Max. power
Min. power
Caution: Ooni Koda should run quietly when lit. If you hear a roaring noise
from the gas burner, switch the gas o for 5 minutes and re-light.
10 11

Other manuals for Ooni Koda

Related product manuals