Oontz Angle solo - Bluetooth Pairing - Step 2 (iPhone, iPad, iPod); Pairing with Smartphone and Tablet Devices

Pair & Connect with Your Device -- Step 2 --
Page 10
- Go to Settings > Bluetooth, check Bluetooth is on
- Select 'OontZ Angle Solo xxx' when it appears under DEVICES (xxx: 3 characters
which are unique to your speaker)
- Your device will connect in a few seconds
- The Blue Light will turn solid blue and there will bea quiet chime
- You can now play your audio wirelessly to your OontZ Angle Solo
- Go to Settings > Bluetooth, check Bluetooth is on
- Scan or Search and select 'OontZ Angle Solo xxx' when it appears under
AVAILABLE DEVICES (xxx: 3 characters which are unique to your speaker)
- Your device will connect in a few seconds
- The Blue Light will turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle Solo
Note: Your Smartphone or Tablet instructions may vary
-- With Your iPhone, iPad, or iPod
-- With Your Smartphone, Tablet & Mobile Devices
Important - The volume control on your device and the speaker work independently
of each other. To play the speaker at the loudest volume, set the volume on your
device to maximum and raise the volume on the speaker to maximum.