126 Climate control
●
Switch on cooling n.
●
Air recirculation system 4 on.
● Set temperature control to
coldest level.
● Set fan speed to highest level.
●
Set air distribution control to M.
● Open all vents.
Demisting and defrosting the
windows l
● Set temperature control to
warmest level.
● Set fan speed to highest level.
●
Set air distribution control to l.
●
Switch on heated rear window Ü.
● Open side air vents as required
and direct them towards the door
windows.
Note
If air distribution mode l is selected
while engine is running, an Autostop
will be inhibited until another air
distribution is selected.
If air distribution mode l is selected
while the engine is in an Autostop,
the engine will restart automatically.
Stop-start system 3 136.
Electronic climate control
system