Vehicle care 201
2. Disengage the bulb socket from
the plug connector by pressing
the retaining lug.
3. Remove and replace the bulb
socket with bulb and attach the
plug connector.
4. Insert the bulb socket into the
reflector by turning clockwise and
engage.
Front turn signal lights
Front turn signal lights consist of long-
life bulbs which cannot be changed.
Consult a workshop in case of a
defective long-life bulb.
Tail lights
1. Release the cover in the load
compartment on the respective
side and remove.
2. Unscrew both plastic securing
nuts from the inside by hand.
3. Carefully withdraw the light
assembly from the recesses and
remove.
To Next Page
Loading...
