200 Vehicle care
Corner lighting
1. Rotate the cap (3) anticlockwise
and remove it.
2. Rotate the bulb holder
anticlockwise to disengage.
Withdraw the bulb holder from the
reflector.
3. Remove the bulb from the plug
connector by disengaging and
pulling.
4. Replace the bulb. Connect and
engage bulb holder with the plug
connector.
5. Insert the bulb holder into the
reflector and rotate clockwise to
secure.
6. Fit the cap and rotate clockwise.
Fog lights
The bulbs are accessible from the
underside of the vehicle.
1. Turn the bulb holder anti-
clockwise and remove it from the
reflector.
To Next Page
Loading...
