Need help?Do you have a question about the OPHIR NOVA II and is the answer not in the manual?
General| Battery Life | 18 hours |
|---|---|
| Power Measurement Range | pW to kW (depending on sensor) |
| Wavelength Range | 190 nm to 20 µm (depends on sensor) |
| Connectivity | USB, RS232 |
| Power Supply | Rechargeable battery or AC adapter |
| Features | Data logging |
| Beam Diameter Range | 0.5 mm to 12 mm (depends on sensor) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Energy Measurement Range | pJ to hundreds of Joules (sensor dependent) |
Basic steps to begin operating the Nova II meter.
Explains device functions when no sensor is attached.
Information on using thermal sensors with the Nova II.
Details on operating the Nova II with photodiode sensors.
Guide to using pyroelectric sensors with the Nova II.
Provides an overview of the Nova II laser power/energy meter's features.
Explains the functionality and use of smart connectors.
Describes how the soft keys operate and their functions.
Details the procedure for turning the Nova II on and off.
Covers functions not dependent on the connected sensor type.
Describes the hardware features of the Nova II meter.
Describes the function of thermopile absorber sensors.
Guides users on selecting settings on the Nova II screen.
How to set up default startup parameters for the Nova II.
Details basic and advanced power measurement procedures.
Explains how to perform energy measurements with the Nova II.
Describes advanced display options and features of the Nova II.
Discusses the characteristics and operation of photodiode sensors.
How to configure the PD300 for specific laser wavelengths.
Setting default operating parameters for startup.
Options for selecting and configuring Nova II settings.
Explains the method of operation for pyroelectric sensors.
Guides users on selecting settings for pyroelectric sensors.
Setting default startup parameters for pyroelectric sensors.
Details energy, power, and exposure measurements with pyroelectric sensors.
Addresses challenges in measuring high-energy repeating pulses.
Information on logging energy data with pyroelectric sensors.
Displays the laser beam's position as measured by the sensor.
Accesses various BeamTrack features via the menu.
Tracks laser beam position over time for pointing stability.
Shows statistics for power, position, and size measurements.
Provides tips for optimizing measurement accuracy.
Details calibration methods for Thermopile and RP sensors.
Explains calibration procedures for photodiode sensors.
Covers calibration methods for pyroelectric sensors.
Lists and explains common error messages displayed by the Nova II.
Provides solutions for common problems encountered with the Nova II.
Covers maintenance procedures, including battery replacement.
Details the technical specifications of the Nova II meter system.
Lists the specifications for various compatible sensors.
To Next Page
