OPHIR RF - Calibration; Table 7. Calibration Mode Displays

Appendix A
This Document contains proprietary and confidential information of Ophir RF Inc.
March 28, 2023 Rev: H
16
3 CALIBRATION
The information in the following section relates to specific technical aspects of the Front
Panel Controller and its integration into the RF Power Amplifier that is beyond the scope
of normal end-user operation. The information is provided for the purpose of
completeness of documentation and is for reference only. Refer to Table 7 during the
discussions contained in this section.
All necessary system configuration and calibration is performed at the factory
prior to shipment. Specialized skills and equipment are required to perform
System Configuration and Calibration, and Ophir RF, Inc., recommends
returning the unit to their facility for the performance of any such functions.
Table 7. Calibration Mode Displays
MENU ITEM
OPTIONS
COMMENTS
Forward Power
None
Calibrate forward power detector as
described in the section below.
Reverse Power
None
Calibrate reverse power detector as
described in the section below.
Gain (VVA)
None
Calibrate Gain adjustment as described
in the section below.
View Peak Values
Forward Power
Reverse Power
Input Power
Temperature
Monitors
Allows the maximum and minimum (if
applicable) values reached to be
viewed.
Monitors
Multiple as described in the
section below.
System Info.
None
Displays system information entered by
the factory.
Exit
Save or not save settings.