10
Attaching Pile Fasteners to Helmet:
Use the pile fastener pieces included with the headset to stow the cable.
NOTE: Use the headset several times to determine the best position for
the pile fasteners. Steps 1 and 2 are provided as a guideline.
1. On both sides of the helmet,
attach the adhesive side of the
fastener to the helmet near the
ARC rail as shown.
2. Press the hook side of the cable
guides to the fasteners.
3. Thread cable loop around cable
and attach to the Velcro on the
back of the helmet.
ATTACHING PILE FASTENERS
Pile Fastener
Cable Guides
Cable Loop
To Next Page
Loading...
