7
Installing the Batteries:
NOTE: Also follow the applicable steps below to replace the batteries.
1. Remove the (2) AAA batteries from the packaging.
2. Pry the ear seal away from the earcup by pressing the tab at the bottom.
3. Insert the battery into the battery
compartment making sure to align the
battery so that the polarity marks (+ and -)
on the battery align with the corresponding
markings in the earcup battery
compartment.
NOTE: Always replace batteries
from both earcups as a set, do not
mix-and-match batteries.
CAUTION: When performing Step 2, be careful not to damage the
rubber seal in the groove on the underside of the earseal.
INSTALLING BATTERIES
+
Positive
-
Negative
Rubber Seal
To Next Page
Loading...
