15
DONNING AND DOFFING
4. Ensure that the ears are centered within the
earcups. If necessary, slide the earcups back
or forward within the pivot arms to adjust the
earcups over the ears.
5. Adjust the microphone over the mouth (within
¼ inch) for optimal performance.
6. Align the headset cable connector to the
matching alignment indicators on the adapter
cable or radio PTT cable and press the
connection together.
NOTE: This quick disconnect is
designed with a break away force of
10lbs to prevent neck injuries in the
event that the cabling becomes snagged.
To Next Page
