21
HEADSET FUNCTIONS
Balance Mode
Balance mode allows you to personalize the balance between both ears to compensate for differences
in you hearing.
To enter balance mode: While the Hear-Through 3DHT is turned on, press the + and – buttons
together twice. The headset will emit a constant tone that will increase in volume as described below.
To increase volume to left earphone: Press the + button one or more times; volume will increase
with each press.
To increase volume to right earphone: Press the – button one or more times; volume will
increase with each press.
To exit balance mode: Press the + and – buttons together once (or wait approximately ve
seconds without adjusting the balance). The headset will return to Hear-Through 3DHT mode.
Switching Between Earphones and Earbuds
Press the center switch to toggle the headset audio between the earphones and the earbuds.
NOTE: The feature only works with headsets which have been factory congured
for optional wireless earbuds. Headsets without this option cannot by upgraded to
allow the use of the wireless earbuds.
To Next Page
Loading...
