AUXILIARY WIRE Y-SLITTER
TM
FUSE
BOX
GROUND
To power the kit using an switched 10 AMP fuse tap method, you may
purchase the AURA Universal Replacement Fuse Tap Adapter Set & Power
Wire on our website. (*Not included; sold separately.)
Feel free to contact us using the link below for product inquires or
installation support.
OPT7 SUPPORT TEAM: https://www.opt-7.com/pages/customer-support
OPTION METHOOD
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
OPT7 Lighting will void product warranty.
DISCLAIMER
Connecting to more than 10 AMP will override the kit and cause early failure,
ensure it is 10 AMP or less !!
Please ensure the Underglow LED Bars / Control Box / Wirings are all mounted
away from heated surfaces exceeding from 85C or 185F.
1.
2.
WARNING
To Previous Page
Loading...
