INSTALLATION
Secure Control box in desired
location with Velcro or zip ties.
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and
securely hidden from exposing
elements of moisture.
Use the zip ties to tie all wiring away
from all moving components.
Using the included E-Z Remote, select your desired color or pattern.
STEP 2
STEP 3
STEP 4
TM
Dimmer
Color Selection
Multi-Color Fade
Multi-Color Cycle
SoundSync™
Press multiple times to change color
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Single-Color Strobe
On / O
Press multiple times to change color
To adjust the sensitivity, please visit
www.OPT-7.com
NOTE: This feature activates white light only.
In order to activate Door Assist Sync, you need to connect the aux wiring of
Aura control box to the positive and negative wiring of dome or door light.
AUX WIRING FOR A DOME/DOOR LIGHT
To Next Page
Loading...
