Need help?Do you have a question about the Optex BX-80N and is the answer not in the manual?
General| Brand | Optex |
|---|---|
| Model | BX-80N |
| Category | Security Sensors |
| Language | English |
BX-80N is an advanced PIR detector designed for early warning boundary protection of buildings.
Creates a multi-layered, horizontal barrier protecting both sides of the detection area.
Increases security by detecting intruders before entry, providing a first line of defense.
Requires both upper and lower detection areas to activate, reducing false alarms from environmental factors.
Eliminates false alarms caused by small animals by judging object size.
Allows setting detection area length in four steps to prevent false alarms and optimize coverage.
Details on individual lower detection areas and adjustable horizontal angles (0-3 degrees).
Patented shielding blocks light and RFI, preventing false alarms from disturbances.
Automatically adjusts sensitivity for high temperatures (35-37°C) to match human body response.
Built-in buzzer signals alarms and aids detection during area check mode.
Install the BX-80N at a height of 0.8 to 1.2 meters for optimal performance.
Mount centrally on the building to cover the immediate perimeter; avoid photobeam applications.
Ensure installation on the wall surface is accurate for correct detection figures.
Install upright with upper detection areas parallel to the ground for operational reliability.
Adjust the lower detection area to match the protection zone, especially for areas shorter than 24m.
Prevent strong light sources (sunlight, headlights) from entering the sensor's field of view.
Do not aim lower detection areas at reflective surfaces like puddles or metal plates.
Adjust angle or use options to prevent obstacles like bay windows or troughs from blocking the area.
Do not point towards moving objects like trees or bushes to prevent false alarms.
To Next Page
