Installation hints
Avoid aiming the lower
detection area toward
reflective objects (puddle, pool,
metal plate, etc.).
If the reflective objects are
unavoidable, please refer to
“detection area pattern A and
B” of page 6 & 7.
6. Avoid direct light
BX-80N includes Double
Conductive Shielding to
prevent false alarms caused by
light disturbances.
It is recommended that you
avoid too much light being
directed or reflected into the
BX-80’s field of view as the
light (such as strong sunlight)
causes an unstable condition
within the sensor’s view.
7. Avoid reflective objects within detection area
13
To Next Page
Loading...
