Optex REDSCAN Series - User Manual

REDSCAN Manager Advanced Help
Version 8.3.3.0
REDSCAN Manager Advanced is Windows application software to configure REDSCAN series, RLS-2020I,
RLS-2020S, RLS-3060L, and RLS-3060SH.
Once RLS-3060SH/L were adjusted with REDSCAN Manager Ver.8 or later, do not readjusted with its
earlier than Ver.8 in order to avoid unexpected activations.

Summary

REDSCAN Manager Quick Start

[Install of REDSCAN Manager]

Instructions for installing the REDSCAN Manager software.

[PC Settings for REDSCAN Manager]

Configuration of PC network and firewall settings for REDSCAN.

[Connecting to REDSCAN]

Procedure for establishing a connection with the REDSCAN unit.

[Area Set]

[Adjusting Detection Area]

[REDWALL Event Code Settings]

[Recommended PC Specifications]

REDSCAN Manager Troubleshooting

Installation Issues

Troubleshooting steps for installation failures of REDSCAN Manager.

Connectivity Issues

Troubleshooting network connectivity issues with REDSCAN units.

Settings Save;Set Issues

False Alarm Reduction Strategies

[Login Procedure]

[Group Registration]

[Basic Detection Mode Settings - RLS-2020]

[Advanced Detection Mode Settings - RLS-2020]

[Advanced Detection Features]

[Basic Detection Mode Settings - RLS-3060 SH]

[Detection Area Configuration]

[Advanced Detection Mode Settings - RLS-3060 SH]

[Basic Detection Mode Settings - RLS-3060 L]

[Advanced Detection Mode Settings - RLS-3060 L]

[Visual Detection Area Adjustment]

[Detectable Range by Target Size]

[Area Masking]

[Area Allocating]

[Network Settings]

[Detector Authentication]

Optex REDSCAN Series Specifications