Getting Started
Mounting the Projector
The projector can be mounted using the
provided table stand (foam ring) or wall
mount.
The wall mount should be screwed to a wall in a vertical position so
that it supports the bottom and top of the projector. Fixtures and ttings
are provided.
Note:
When wall mounting, the safety cord
should be tted to the projector. To
do this, attach the spring clip on the
safety cord onto the side of the
projector as per the image left.
2
Designed and Manufactured in the UK by Optikinetics
Aura
To Next Page
Loading...
Need help?
General
