Optimum DRO 5 - Operations

OPTIMUM
MASCHINEN - GERMANY
Version 1.0.4 dated 2015-11-19Page 20 Original operating instructions
DRO 5GB
3.3 TTL differential signal
6-pin socket: (Metal outer ring)
4Function
 Display: three position display, one speed display
 Counting resolution setting function
 Counting direction setting
 Linear error compensation
 Metric / inches change-over
 LCD display status setting
 Speed mode setting
 Basic value setting
4.1 Keyboard (eight keys)
Pin No. 1 2 3 4 5 6 Metal outer ring
TTL differential
signal
+5V A+ A- B+ B- 0V Shielding
1
2
6
5
3
4
The selection keys of axes
Function selection key, enter key.
Moving key
Increase or decrease key of the digits