Need help?Do you have a question about the Optimum OptiDrill DQ 22 and is the answer not in the manual?
Explains safety classifications, warning notes, and hazard symbols.
Defines proper machine usage and potential misuse scenarios.
Lists inherent risks associated with the machine's operation.
Specifies requirements for operating personnel.
Details precautions to be taken while operating the machine.
Lists mandatory safety gear for users.
Outlines pre-operation and regular safety inspections.
Describes the function and use of the emergency stop button.
Explains guards and covers for safety.
Safety guidelines for maintenance activities.
Information on noise levels during operation.
Technical drawings and dimensions specific to the DQ14 model.
Technical drawings and dimensions specific to the DQ18 model.
Technical drawings and dimensions specific to the DQ22 model.
General instructions for handling and unboxing.
Workplace and environmental conditions for setup.
Procedures for initial machine setup and startup.
Identification of machine controls and indicators.
Step-by-step guide to powering on the drilling machine.
Step-by-step guide to powering off the drilling machine.
Instructions on setting the drilling depth limit.
How to adjust the drilling table's angle.
Procedures for changing spindle speed.
Guidance on removing and fitting drill chucks and bits.
Methods for using coolant during drilling.
Tables for recommended cutting speeds and feed rates by material.
Reference table for spindle speeds (RPM) based on cutting speed.
Essential safety precautions before performing maintenance.
Routine checks and maintenance procedures for the machine.
Guidelines and procedures for machine repairs.
Information required when ordering replacement parts.
Contact details for ordering spare parts.
Exploded view and part list for the DQ14 drill head assembly.
Exploded view and part list for the DQ14 column assembly.
Electrical schematic for the DQ14 model.
Exploded view and part list for the DQ18 drill head assembly.
Exploded view and part list for the DQ18 column assembly.
Electrical schematic for the DQ18 model.
Exploded view and part list for the DQ22 drill head assembly.
Exploded view and part list for the DQ22 column assembly.
Electrical schematic for the DQ22 (230V) model.
Electrical schematic for the DQ22 (400V) model.
Legal notice regarding document usage rights.
Definitions of technical terms used in the manual.
Information on product warranty coverage and claim procedures.
Guidelines for proper storage of the machine and parts.
Instructions for environmentally friendly disposal of equipment.
Guidance on recycling and disposal through local services.
Request for user feedback on machine performance.
Measurement of the flatness of the machine's base working surface.
Measurement of radial runout for the spindle axis.
Checks spindle axis perpendicularity to the table surface.
Checks spindle axis perpendicularity to the table surface.
Measurement of the axial movement of the spindle sleeve.
Measurement of the radial movement of the spindle sleeve.
Measurement of the maximum height difference between pulleys.
To Next Page
General