Need help?Do you have a question about the Optimum OPTIdrill DQ 32 and is the answer not in the manual?
General| Drilling capacity in steel (diameter) | 32 mm |
|---|---|
| Continuous drilling capacity in steel (diameter) | 25 mm |
| Spindle mount | MT 4 |
| Drill spindle stroke | 150 mm |
| T-slots size | 14 mm |
| Column diameter | 115 mm |
| Motor power | 1.5 kW |
| Number of speed stages | 12 |
Explanation of symbols used in the operating manual to convey safety information.
Details on identifying the machine's rating plates, including model and specifications.
Identification and meaning of additional pictograms used for specific safety warnings.
Overview of emission data, including noise levels, for the drilling machine.
Detailed physical dimensions and layout for the OPTIMUM DQ25 drilling machine.
Detailed physical dimensions and layout for the OPTIMUM DQ32 drilling machine.
Guidelines for safe internal transport, installation, and potential risks involved.
Steps for checking delivery status, claiming damages, and unpacking the machine.
List of standard accessories provided with the drilling machine for initial use.
Identification and description of all control buttons, switches, and indicators on the machine.
Essential safety warnings and requirements before performing maintenance or repairs.
Information required for ordering spare parts, such as serial number and machine name.
Contact details for the spare parts hotline for inquiries and orders.
Contact information for the service hotline for technical support and assistance.
Statement regarding the protection of the manual's content by copyright.
Definitions of technical terms used throughout the operating manual.
Details the terms and conditions of the product's warranty and liability.
Guidelines for proper storage of machine parts to prevent damage, including environmental conditions.
Guidance on environmentally friendly disposal of equipment and packaging.
Information on disposing of used electrical and electronic components through local collection points.
Request for feedback on modifications, malfunctions, or experiences with the drilling machine.
To Next Page