Need help?Do you have a question about the Optimum OPTIdrill DQ 25 and is the answer not in the manual?
General| Drilling capacity in steel (diameter) | 25 mm |
|---|---|
| Spindle mount | MT 3 |
| Number of speeds | 12 |
| Spindle stroke | 85 mm |
| T-slot size | 14 mm |
| Motor power | 0.75 kW |
Information about the machine's identification and specifications.
Explains safety symbols, warning notes, and their meanings.
Defines the proper and intended application of the drilling machine.
Outlines potential improper uses and their associated risks.
Identifies inherent hazards associated with operating the drilling machine.
Specifies the necessary qualifications and training for machine operators.
Describes the standard operator's position relative to the drilling machine.
Details crucial safety precautions to be observed during machine operation.
Lists and explains the integrated safety features of the drilling machine.
Specifies the required personal protective equipment (PPE) for safe operation.
Outlines the procedures for performing safety checks before and during operation.
Explains the function and operation of the emergency stop switch.
Details the protective covers and guards for safe operation.
Specifies PPE for specific tasks and emphasizes eye/face protection.
Provides critical safety advice and rules for operating the drilling machine.
Outlines safety procedures for maintenance and repair tasks.
Discusses electrical safety and maintenance requirements for the machine.
Specifies required inspection intervals and procedures for electrical systems.
Details noise emission levels and required hearing protection measures.
Provides detailed dimensional drawings and specifications for the DQ25 model.
Provides detailed dimensional drawings and specifications for the DQ32 model.
General guidelines for safe transport, installation, and initial setup.
Instructions for checking the machine upon delivery and reporting damages.
Procedures for safely unpacking the machine and verifying contents.
Step-by-step instructions for assembling the drilling machine components.
Specifies environmental and site requirements for machine installation.
Guide for the initial startup and operation of the machine after installation.
Details the procedures and safety precautions for electrical connection.
Identifies and describes the various controls and indicators on the machine.
Explains the function of each button and switch on the control panel.
Step-by-step guide for safely turning the drilling machine on.
Procedures for safely shutting down the drilling machine.
Instructions on how to set and adjust the drill depth.
Details how to adjust the drilling table angle and its implications.
Explains how to adjust the spindle speed and belt tension.
Lists essential checks and preparations before commencing drilling operations.
Safety precautions and operational tips for performing drilling tasks.
Describes the operation and safety considerations of the spindle sleeve feed.
Instructions for safely removing and installing drill chucks and bits.
Explains the importance and methods of cooling during drilling operations.
Provides tables for recommended cutting speeds and feed rates based on material.
Offers a table to determine appropriate spindle speeds for various drill bit diameters.
Provides examples and formulas for calculating optimal drilling speeds.
Highlights safety warnings and precautions related to maintenance procedures.
Details the schedule and procedures for regular inspection and maintenance tasks.
Explains how to request repair services and use authorized parts.
Lists information required for ordering spare parts.
Provides contact information for the spare parts hotline.
Provides contact information for the general service hotline.
Features exploded views and diagrams of machine parts for identification.
Presents the electrical wiring diagram for both DQ25 and DQ32 models.
States the copyright information and reserved rights for the document.
Defines key terms and technical vocabulary used in the manual.
Outlines the terms and conditions regarding product liability and warranty claims.
Instructions for proper storage of machine components to prevent damage.
Provides guidance on environmentally friendly disposal and reuse of the machine and packaging.
Lists changes and version updates for the manual.
Requests feedback and information from users for product improvement.
To Next Page