Optimus F-6218 - Grounding Instructions; Grounding Plug and Adapter Usage; After Season Care; Storage and Maintenance for Off-Season

THERMAL CUT-OUT DEVICE
A Thermal cut-out device was mounted in the motor. When overheats due to various
reasons, it will cut off automatically.
GROUNDING INSTRUCTIONS:
The cord has a plug as shown in Figure A. See Figure 1 for grounding instruction. An
adapter as shown at C is available for connecting three-blade grounding type plugs to
two-slot receptacles. The green grounding plug extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box.
The adapter should not be used if a three-slot grounded receptacle is available. Always
plug fans directly into a wall outlet/receptacle. Never use with an extension cord or
relocatable power tap
(outlet/power strip).
CLEANING/ MAINTENANCE INSTRUCTIONS:
• Always unplug the fan before cleaning, disassembly or servicing.
use only a soft, damp cloth to gently wipe the outer surfaces of the fan clean.
• To clean between the grilles, we recommend using a pipe cleaner, flexible
dustwand, vacuum cleaner or compressed air to gently remove the dust.
• DO NOT immerse the fan in water and never allow water to drip into the motor
housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, you may leave the fan assembled and covered to protect it from dust.
Store the fan in a cool and dry place.
AFTER SEASON CARE:
• Your fan can be stored in the off-season either partially disassembled or assembled.
• Before putting the fan in storage, clean thoroughly, cover with a vinyl bag and store
in a cool and dry place. We recommend using the original (or appropriately sized)
box.
USER SERVICING INSTRUCTIONS:
• Grasp the plug and remove it from the receptacle or other outlet device. Do not
unplug by pulling on the cord.
• Open the fuse cover. Slide open the fuse access cover on top of attachment plug
towards blades.
• Remove the fuse carefully. Push the fuse from the other side or turn the fuse holder
over to remove the fuse.
• Risk of fire. Replace the fuse only with 5A, 125 Volt fuse.
• Close the fuse cover. Slide closed the fuse access cover on top of the attachment
plug.
• Risk of fire. Do not replace attachment plug. Contains a safety device(fuse) that
should not be removed. Discard product if the attachment plug is damaged.
• Do not attempt to repair or adjust any electrical or mechanical functions on this unit.
Doing so will void the warranty.
• If you have any questions regarding this unit's operation or believe any repair is
necessary, please call 1-888-672-5832 to speak with a Customer Service
Representative.
• If you need to exchange the unit, please return it, in its original carton with a sales
receipt enclosed, to the store you purchased it from. If you are returning the unit
more than 30 days aner the date of purchase, please see the enclosed warranty. If
you have any other question or comments, feel free to write us:
Optimus Enterprise, Inc.
2201 E. Winston Road, Unit J
Anaheim, CA 92806
E-mail: Service@Optimusent.com
TEL: 714-956-1300