Optimus SYSTEM 728 - Replacing;Adding a Track in a Programmed Sequence; Clearing the Programmed Sequence

23
Replacing/Adding a Track in
a Programmed Sequence
1. While play is stopped, repeat-
edly press
PROGRAM
until the
track position number you want
to replace or add to appears on
the display.
2. Press
CD SKIP
to select the CD
containing the new track.
3. Press
SKIP
or
SKIP
until the desired track appears
on the display.
4. Press
PROGRAM
. The new track
replaces a previous track or is
added to the programmed
sequence.
Clearing the Programmed
Sequence
To clear the entire programmed se-
quence, press
STOP
while play is
stopped, or press
OPEN/CLOSE
.
∇ ∇
∇ ∇
13-1275.fm Page 23 Wednesday, July 14, 1999 3:59 PM