8
INSTALLING THE
REMOTE CONTROL’S
BATTERIES
The remote control requires two AA
batteries (not supplied) for power.
We recommend alkaline batteries,
such as Radio Shack Cat. No. 23-
557.
Follow these steps to install batter-
ies.
1. Press down and slide the battery
compartment cover in the direc-
tion of the arrow.
2. Install the batteries as indicated
by the polarity symbols (
+
) and
(
-
) marked inside the compart-
ment.
3. Replace the cover.
Caution:
If you are not going to use
the remote control for a month or
more, remove its batteries. Weak
batteries can leak damaging chemi-
cals.
Note:
If the remote control operates
erratically or does not work, replace
both batteries.
CONNECTING TO
POWER
After you complete all connections,
plug the music system’s supplied
power cord into a standard AC outlet.
The STAND BY indicator lights, and
and
AM 12:00
appear on
the display (see “Setting the Clock”).
Warning:
To prevent electric shock,
the AC power cord plug’s blades are
polarized and fit a polarized AC outlet
only one way. If you have difficulty in-
serting the plug, do not force it. Turn
it over and reinsert it.
CLO
13-1275.fm Page 8 Wednesday, July 14, 1999 3:59 PM
To Next Page
Loading...