Optimus SYSTEM 728 - Operation; Turning Power On;Off; Setting the Clock

9
OPERATION
TURNING POWER ON/
OFF
Warnin
g
:
To protect your hearing,
set
VOLUME
to
MIN
before you turn
on the system.
Press
POWER
to turn on the system.
The STAND BY indicator turns off
and the indicator above
CD
,
TUNER
,
TAPE
, or
AUX
lights.
Notes:
• If the indicator above
CD
,
TAPE
,
or
AUX
appears, and the
time appear on the display.
• If the indicator above
TUNER
appears, the AM or FM station
previously selected appears on
the display.
SETTING THE CLOCK
1. If necessary, press
DISPLAY
so
and the time appear on
the display
.
2. Press
MEMORY
. flashes
on the display.
Note:
If you do not press
TUN-
ING
or within 10 sec-
onds after you press
MEMORY
,
stops flashing on the dis-
play. Start again from Step 2.
3. While flashes, repeatedly
press
TUNING
to set the
desired hour. If you press and
hold down
TUNING
, the hour
advances continuously.
Note:
AM
or
PM
appears when
you set an AM or PM hour.
4. While flashes, repeatedly
press
TUNING
to set the
desired minutes. If you press
and hold down
TUNING
, the
minutes advance continuously.
5. Press
MEMORY
again when you
finish setting the time, or just
wait 10 seconds.
CLO
CLO
CLO
〈
〉
CLO
CLO
〈
〈
CLO
〉
〉
13-1275.fm Page 9 Wednesday, July 14, 1999 3:59 PM