11
2. Press
PROGRAM
on the CD
player.
00
P
:01
MEMORY
appears on the display.
3. Press
SKIP
or to select
the track you want to store in the
first memory location.
4. Press
PROGRAM
. That track is
stored in location
01
, and
00
P
:02
MEMORY
appears on the dis-
play.
5. Repeat Steps 3 and 4 to program
up to 21 tracks.
Note:
If you try to program more
than 21 tracks, you will replace
the first tracks with new tracks.
6. Press
PLAY/PAUSE
. The CD
player plays the tracks in the pro-
grammed order. , the current
track number, the track’s elapsed
time, and
PROGRAM
appear on
the display.
During play, you can press
SKIP
or to move through the pro-
grammed tracks. The track plays auto-
matically and the display shows the
current track.
Checking a Programmed
Sequence
While a CD is stopped, repeatedly
press
PROGRAM
to move through the
programmed sequence.
Replacing a Track in a
Programmed Sequence
While a CD is stopped, repeatedly
press
PROGRAM
until the track you
want to replace appears on the dis-
play. Then press
SKIP
or until
the new track appears on the display.
Press
PROGRAM
.
Clearing a Programmed
Sequence
To clear the programmed sequence,
press
CLOSE/ OPEN
.
13-1292.fm Page 11 Wednesday, July 14, 1999 6:37 PM
To Next Page
Loading...