8
USING THE CD PLAYER
PLAYING A CD
Note:
To protect your hearing, set the
volume to its lowest setting before you
begin playing a CD.
1. Press
POWER
to turn on the sys-
tem. The POWER indicator lights.
2. Set
FUNCTION
to
CD
.
00
appears
briefly, then
dISC
appears on the
display.
3. Press
CLOSE/ OPEN
to open the
CD compartment.
OPEN
appears
on the display.
4. With the label side up, carefully
place the CD’s hole over the cen-
ter hub.
5. To close the CD compartment
door, press down gently on the
right corner of the CD compart-
ment door until the door clicks
shut.
00
appears on the display
for a few seconds, then the dis-
play shows the total number of
tracks and the CD’s total playing
time.
6. Press
PLAY/PAUSE
to play all the
tracks in order starting with Track
1. , the current track number,
and the current track’s elapsed
time appear on the display.
Note:
Press
PLAY/PAUSE
to stop
the CD temporarily.
II
appears
on the display. Press
PLAY/PAUSE
again to resume playing the CD.
13-1292.fm Page 8 Wednesday, July 14, 1999 6:37 PM
To Next Page
Loading...
