14
Optional Kit
Flush Valve Assembly
(
1) Flush Valve Assembly
(8ft) - 3/8” (TUBE NOT SHOWN)
Optional Fitting Kit
1/2” Tube Connection
(
2) - Connectors, O-rings, Clips
K
IT #:
170-52912
O
PTIONAL KITS & REPLACEMENT PARTS
KIT #:
5
75-92272
Optional Fitting Kit
3/4 NPT MALE Connection
(2) - Connectors, O-rings, Clips
KIT #:
575-92273
Optional Fitting Kit
1/2 NPT MALE Connection
(2) - Connectors, O-rings, Clips
KIT #:
575-92274
Replacement Assembly / Part
Bypass / Multi-Functional Valve
Part:
575-92274
Replacement Assembly / Part
(1) Plug Assembly with O-ring
(1) Manifold, Head Clip
Parts:
575-92264
575-92225
Replacement Assembly / Part
(1) Port Plug Assembly with O-ring
(1) Manifold, Port Clip
Parts:
575-92265
575-92230
Replacement Assembly / Part
(1) PSI Gauge Assembly with O-ring
(1) Manifold, Port Clip
Parts:
575-92266
575-92230
Pressure Gauge Monitoring:
Periodically monitor the pressure gauge on the OptiPure System. If the needle on the gauge ever
enters the red zone (while the connected equipment is in operation and water is flowing through the
system to the equipment) it may be an indication that the filters have become clogged.
Maintenance:
The only routine maintenance your OptiPure System should ever require is periodic filter cartridge
changes. Filter changes are necessary for optimum performance of your foodservice equipment. If
the system sizing recommendations have been followed the OptiPure System is designed to provide
a six (6) month filter replacement interval on most tap water.
Additional Replacement Parts
(Not Shown):
Part# Description
19782 Multi-Function Valve Wrench
575-92233 O-Ring 0-118 (Body & Fittings)
575-92234 O-Ring 0-021 (Body)
575-92235 O-Ring 0-110 (Port)
575-92239 O-Ring 0-120 (Handle Lower)
575-92240 O-Ring 0-122 (Handle Upper)
575-92249 Cover 2 UP
575-92250 Cover 3 UP
575-92251 Cover 4 Up
575-92232 Cover Screw 1/4-.375 Black
To Next Page
