To Next PageTo Next Page
Need help?Do you have a question about the Optoma EP 738 and is the answer not in the manual?
General| Brightness | 3000 ANSI lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 2000:1 |
| Display/Projection Technology | DLP |
| Lamp Life | 2000 hours (standard), 3000 hours (eco mode) |
| Projection Size | 23 - 300 inches |
| Input Ports | S-Video, Composite Video |
| Throw Ratio | 1.95 - 2.15:1 |
General guidelines for safe operation and maximizing unit lifespan through warnings and maintenance.
Details the projector's capabilities as an SVGA single chip DLP projector and lists key features.
Lists all included items with the projector and advises checking for completeness upon receipt.
Illustrates the projector's main unit, identifying key external parts and their labels.
Identifies and explains the functions of the buttons on the projector's control panel.
Details the various input and output connectors available on the projector.
Explains the layout and functions of the buttons on the projector's remote control.
Provides a diagram and list of cables required to connect the projector to various input sources.
Step-by-step instructions for turning the projector on, including initial setup and power indicators.
Details the procedure for safely powering down the projector, including cooling cycles and indicators.
Explains the meaning of various LED indicator lights (Lamp, Temp) and potential error states.
Guides users on adjusting the projected image height using the projector's elevator foot.
Instructions on how to use the zoom and focus rings to achieve a clear image.
Provides a chart showing projected image sizes based on distance and projector settings.
Details the functions of buttons on the projector's control panel like Power, Source, Menu, and Keystone.
Describes the functions of various buttons on the remote control, including Power, Volume, Freeze, and Source selection.
Explains how to navigate and use the multilingual On Screen Display (OSD) menus for image adjustments.
Instructions on how to select the preferred language for the OSD menu.
Details image adjustment settings like Display Mode, Brightness, Contrast, and Color.
Covers advanced computer mode settings like Frequency, Tracking, H/V Position, Degamma, and Aspect Ratio.
Explains video mode settings such as Degamma, Saturation, Tint, Sharpness, and Aspect Ratio.
Describes how to adjust Volume and Mute functions for the projector's audio output.
Covers management settings like Menu Location, Projection modes (Desktop, Ceiling), Signal Type, and Source Lock.
Details lamp-related settings including Lamp Hour, Lamp Reset, Lamp Reminding, ECO Mode, and Auto Power Off.
Provides solutions for common problems like 'No image', 'Partial/scrolling image', and 'Image is out of focus'.
Step-by-step guide and safety precautions for replacing the projector's lamp module.
Lists supported resolution and frequency modes for both analog and digital video inputs.
Provides specifications and guidance for installing the projector using a ceiling mount, including screw types.
