Optoma EX330 - Change Password

34
English
User Controls
■ First Time:
1.ThePasswordis4digits,DEFAULTVALUEis“1234”.(rsttime)
2. Use number buttons on the remote to select your password, and then press
“ ”keytoconrmyourselection.
Change Password
1. Press “ ” to input old password.
2. Use number button to enter current password, and then press
“ ” key again to reveal next OSD menu.
3. Scroll down to highlight Password, and then press “
” to
activate.
4. Enter new password (4 digits in length) using the number
buttons on the remote, then press “ ” to conrm.
5. Enter new password again and press “
” to conrm.
Setup | Security